Melamine Faced Board

        We provides short cycle lamination line used to produce Melamine Faced Board. It has a consistent colouring and grain pattern. It is durable to years of commercial use, easy to clean, easy to take care of and won’t crack-up from abrasion, water steam or staining.

Physical product advantage

Resistance to abrasion

Resistance to craking

Resistance to water steam

Resistance to burning

Resistance to staining

Our Melamine Faced board is formed by covering a MDF / HMR / HDF with a decorative resin-impregnated paper. There are available in a variety of thicknesses and a decorative finish and texture to one or both sides.

We offer wide range of Melamine Faced MDF board provide a hard, pre-finished surface, easy to maintain and extremely hard wearing. Whatever the texture or colour you require, we will have a product to suit.

The texture / colour available are show next page

Wood Grain (W) / ผิวเสี้ยนไม้

Matt (M) / ผิวเรียบด้าน

Stipple (S) / ผิวส้ม

Groove (G) / ผิวล่องลึก

Brush (B) / ผิวลายเส้น

Authentic (A) / ผิวธรรมชาติ

AGF - 01 White

AGF - 02 Light gray

AGF - 03 Black

AGF - 05 Wenge

AGF - 06 Smoky

AGF - 07 Tectona

AGF - 09 Iron

AGF - 10 Vanilla

AGF - 11 Beech

AGF - 12 Red mountain

AGF - 13 Cappuchino

AGF - 14 White oak

AGF - 15 Chestnut

AGF - 16 Wheat

AGF - 17 Hazel

AGF - 18 Sugar Pine

AGF - 19 Sanders

AGF - 20 Espresso

AGF - 21 Harvest

AGF - 22 Biscuit Oak

AGF - 23 Frassino

AGF - 24 Kobicha

AGF - 25 Umber

AGF - 26 Colonial

AGF - 27 Lace

AGF - 28 Onyx

AGF - 29 Silk

AGF - 30 Leather

AGF - 31 Dark grey

Properties Specification Result Method
RESISTANCE TO ABRASION One test piece measuring 100 mm * 100 mm , Taber Abraser applied coated 180 grit on Melamine Board surface until the initial wear point clearly recognisable wear-through of the print. IP Class 1 < 50 รอบ CLASS 1 EN 14322, EN 14323
IP Class 2 > 50 รอบ
IP Class 3A > 150 รอบ
IP Class 3B > 250 รอบ
IP Class 4 > 350 รอบ
RESISTANCE TO CRACKING One test piece measuring 250 mm * 250 mm , Melamine Board is placed in oven at 70◦C for 24 hours. Rating 5 Without cracks > 4 EN 14322, EN 14323
Rating 4 Isolated hairline cracks
Rating 3 Hairline cracks randomly distributed over the total surfaces
Rating 2 In addition to stage 3 ,1 to 2 small cracks < 25 mm have appeared on the surface with are still visible at an observation distance of 400 mm
Rating 1 More cracks spread over the total surface area .
RESISTANCE TO WATER STEAM One test piece measuring 100 mm * 100 mm , Melamine Board surface exposed for 1 hour to steam Rating 5 No visible change > 4 EN 14322, EN 14323
Rating 4 Slight change of gloss and/or colour , only visible at certain viewing angles.
Rating 3 Moderate change of gloss and/or colour.
Rating 2 Marked change of gloss and/or colour.
Rating 1 Surface distortion and/or blistering.
RESISTANCE TO
BURNING
Three test pieces ( 100 mm * 100 mm ), Lighted cigarette placed on Melamine Board surface. Slight brownish colour which can be wiped off with ethano Rating 5 No visible change > 4 EN 14322, EN 14323
Rating 4 Slight change of gloss and/or colour , only visible at certain viewing angles.
Rating 3 Moderate change of gloss and/or colour.
Rating 2 Marked change of gloss and/or colour.
Rating 1 Surface distortion and/or blistering.

RESISTANCE TO
STAINING

Individual test pieces of any suitable size shall be used , Melamine Board surface exposed to various staining materials for 16 hours

(Staining materials :
Tea , Coffee , Soy Sauce etc.)

Rating 5 No visible change > 4 EN 14322, EN 14323
Rating 4 Slight change of gloss and/or colour , only visible at certain viewing angles.
Rating 3 Moderate change of gloss and/or colour.
Rating 2 Marked change of gloss and/or colour.
Rating 1 Surface distortion and/or blistering.